From JAPAN to the world, For your BEST design, We provide HIGH QUALITY industrial products & the BEST SOLUTION!
2017.11.21
++NEW++TOYOCONNECTOR-TC3-CS Coupling
Applications | A coupling for equipment and devices handling foods, beverages, chemicals and the like |
---|---|
Material | Stainless steel |
Details | Nipple, cam arm: SCS14 (equivalent to SUS 316) Clamping plate, ring, pin, spring: SUS 304 Gasket: Silicone rubber Cap nut: SCS13 (equivalent to SUS 304) Sleeve: Polyacetal Packing: Silicone rubber |
· Precautions for use · User's Manual | |
---|---|
[Prevents leaks and disconnections] | Attaches securely to the hose with a special sleeve construction, eliminating fluid leaks and hose disconnections. |
[Labor savings] | Additional tightening is not needed for reduced maintenance. |
[Standardization of work (hyojunka)] | The cap nut means no bothersome clamp position adjustments or torque control so work can be standardized. |
[Sanitary] | The shape of the nipple prevents liquid pooling, making it sanitary and perfect for conveying foods and beverages. |
[Can be installed on-site] | Unlike products requiring tightening, the hose length can be adjusted on-site for easy installation. |
[Waste reduction] | Coupling units can be reused, reducing waste and cutting costs. |
[Risk reduction] | The TOYOCONNECTOR-TC3-CS prevents hose problems such as leaks and disconnections due to vibration. If there is an earthquake or other disaster, it is easy to restore everything back to working order. |
Coupling exterior | Schematic drawing | ||||||||
TC3-CS |
|||||||||
Product no. | Coupling standards | Size (mm) | Weight | Packaging quantity | |||||
L | φd1 | A | B | φC | HEX | g | Pieces | ||
TC3-CS 19 | 3/4" | 62.5 | 17.0 | 112.0 | 66.0 | 32.4 | 36 | 350 | 10 |
TC3-CS 25 | 1" | 73.0 | 22.5 | 139.0 | 82.0 | 37.3 | 42 | 550 | 8 |
*Pressure and temperature ranges are based on the standards of compatible hoses.
TOYOCONNECTOR TC3-CS | Compatible Hoses | ||||
TOYOFOODS | HYBRID TOYOFOODS | TOYOFOODS-S | TOYORING-F | ||
TFB | HTF | TFS | TGF | ||
Vinyl chloride | Vinyl chloride | Vinyl chloride | Vinyl chloride | ||
Food-grade | Food-grade | Food-grade | Food-grade | ||
Heat-resistant | Heat-resistant | Heat-resistant | Heat-resistant | ||
Vacuum | Vacuum | ||||
Materials: Stainless steel | Easy to cut | ||||
Product no. | Coupling standards | ||||
TC3-CS 19 | 3/4" | OK | OK | - | OK |
TC3-CS 25 | 1" | OK | OK | OK | OK |
TOYOCONNECTOR TC3-CS | Compatible Hoses | |||||
ECORON | ECORON-S | TOYOFUSSO | TOYOFUSSO-E | TOYOFUSSO-S | ||
EC | ECS | FF | FFE | FFS | ||
Polyolefin | Polyolefin | Fluorine | Fluorine | Fluorine | ||
Food-grade | Food-grade | Food-grade | Food-grade | Food-grade | ||
For indoor use only | For indoor use only | Chemical-resistant | Chemical-resistant | Chemical-resistant | ||
Chemical-resistant | Chemical-resistant | Non-adhering | Non-adhering | Non-adhering | ||
Materials: Stainless steel | Vacuum | Prevents static electricity | Vacuum | |||
Product no. | Coupling standards | |||||
TC3-CS 19 | 3/4" | OK | - | OK | OK | OK |
TC3-CS 25 | 1" | OK | OK | OK | OK | OK |
Replacement sleeve set |
||
Product no. | Compatible TOYOCONNECTOR part no. | Packaging quantity |
Pieces | ||
TC3-F19-RSS | TC3-CS19 | 10 |
TC3-F25-RSS | TC3-CS 25 | 10 |
The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. We cannot guarantee the performance or the ability to maintain the product if a non-TOYOX hoses is connected.
1 | Twist the cap nut to remove it from the nipple. | |
2 | Pass the hose through the cap nut and then the TC3-CS sleeve with packing. | |
3 | Insert the hose into the nipple. For best results, use the table at right to find the correct hose insertion length and mark the hose before inserting. As shown in the figure at right, there is a small hole that can be used to check when the hose is inserted to the proper length. | |
4 | As shown in Fig. 1, use a monkey or motor wrench to fasten the flat part of the nipple, and tighten until there is no gap between the nipple and the cap nut. |